Mobile Server configuration tabs

Mobile Server - Properties tab

Click the Properties tab to configure the common Genetec™ Mobile behaviors and select the Security Center Mobile features you want to enable.

• Web address:

  Define the suffix of the URL used by Genetec™ Mobile to connect to the Mobile Server. The format of the URL is host:port/web address, where host is the IP address or hostname of the server hosting the Mobile Server role, port is HTTPS port 443 by default, and web address is Mobile by default. Each Mobile Server role must have a unique URL. If two roles are hosted on the same server, they must have different web addresses or use different ports.
• Use the default secure HTTP port of the server:

  By default, the Mobile Server communicates with the mobile devices over HTTPS port 443. If your IT policy requires a different port, or there is some sort of conflict, you can change this port. Set this option to OFF, and then change the port number.
• Maximum inbox messages per user:

  Define the maximum number of messages that Genetec™ Mobile keeps in its inbox. If a new message is received while the inbox is full, the oldest message is deleted.
• Session timeout:

  Define the maximum period of inactivity, meaning the app is in the background, before the Mobile Server automatically logs the user off.
• Maximum number of client sessions:

  Set a limit to the number of Genetec™ Mobile connections that this role can handle to avoid overloading the server. The default is no limit.

• Features:

  Select the features you want to enable in Genetec™ Mobile on devices connected to this Mobile Server.

  • Alarms:

    Allow Genetec™ Mobile users to monitor and acknowledge alarms.
  • Device camera streaming:

    Allow Genetec™ Mobile to enroll mobile device cameras in Security Center. Click to configure the settings.

    • Maximum sequence length:

      Maximum duration of the streamed video. After the duration elapses, the streaming automatically stops to prevent battery drain.
    • Port start and end index:

      Port range used for mobile device cameras.
    • Archiver:

      Archiver role responsible to manage the device cameras.
    • Location:

      Area entity where the device cameras are grouped under.
  • License plate management:

    (Genetec™ Mobile 5.1.0 and later) Allow mobile users to view live LPR events (reads and hits), to add license plates to hotlists, and to generate reports on reads and hits.
  • Maps:

    Allow Genetec™ Mobile to display Security Center entities and live events on maps.
  • Push notifications:

    Allow Genetec™ Mobile to receive push notifications from the Mobile Server.
  • Threat levels:

    Allow the Genetec™ Mobile user to display and set threat levels.
  • Tracking:

    Allow Genetec™ Mobile to share its device location with other users on the system so that its user can be displayed on georeferenced maps, in Security Desk, and other instances of Genetec™ Mobile.
  • Video:

    Allow Genetec™ Mobile to display video from Security Center. Click to configure the settings.

    • Maximum number of video streams:

      Set a limit to the number of video streams that this role can handle to avoid overloading the server. The default is no limit.
    • Limit Media Gateway role usage:

      Turn this switch on to limit the use of the Media Gateway role to the selected servers to accommodate your network limitations. Only the servers assigned to the Media Gateway role are listed.
    • WiFi video settings:

      Set the maximum resolution and frame rate when a video stream is sent using WiFi. If the available video stream is at a higher quality than the maximum, the Media Gateway downscales it before the Mobile Server sends it to the mobile device. The mobile user can also change this setting within Genetec™ Mobile.
    • Cellular video settings:

      Set the maximum resolution and frame rate when a video stream is sent using cellular data. If the available video stream is at a higher quality than the maximum, the Media Gateway downscales it before the Mobile Server sends it to the mobile device. The mobile user can also change this setting within Genetec™ Mobile.

Mobile Server - Resources tab