Supported map objects

Map objects are graphical representations of Security Center entities or geographical features, such as cities, highways, rivers, and so on, on your maps. With map objects, you can interact with your system without leaving your map.

Map objects are represented by dynamic icons or colored shapes that you can point to and click. You can configure the appearance of most map objects.

The following map objects are supported:

Map object	Default appearance on maps	Application and specific actions
Access control unit	- Access control unit in Online state - Access control unit in Offline state - Access control unit in Warning state	Monitor the state of the access control unit.
Alarm	- Inactive alarm - Active alarm Semi-transparent polygon or ellipse that changes to the color assigned to the alarm and flashes if the alarm is active. A map object linked to an active alarm is flagged with an alarm notification bubble that has the same color as the alarm. If Display alarms from linked maps is enabled in the map options, the number of active alarms on a linked map is shown on the Maps task toolbar, floor controls, and links to that map.	Shows alarms on maps, lets you investigate, acknowledge, snooze, or forward the alarm, and lets you review the alarm procedure. Useful when no entities attached to the alarm are represented on maps. Point to the bubble to show more details. Click the notification bubble to replace it with a tile bubble. (Inactive) Click to trigger the alarm manually. (Active) Click to display the alarm in a tile bubble.
Area	Map thumbnail (always linked to the map that it represents) Colored semi-transparent polygon or ellipse (optionally linked to a map)	Point to show people count or people presence, if enabled. Remove selected cardholders from the area. Click to display the area or map in a tile bubble, or to switch to a linked map, if defined.
Camera	- Camera is not recording - Camera is recording - Camera detected motion (with green ripple effect) - Camera is in maintenance mode Fixed cameras are shown with a blue field of view (FOV). PTZ cameras are shown with a green FOV.	Monitor alarms and camera events. Click to view live or playback video in a tile bubble. If the camera supports position feedback, click and drag the FOV to pan and tilt. Use the PTZ widget to zoom in and zoom out. Click a location on the map while holding the Ctrl key to point all available cameras to that location.
Camera sequence	- Camera sequence	Display multiple cameras at the same time. Point PTZ cameras to a specific location. Double-click the camera sequence to display all the cameras in separate tiles in the Monitoring task. If the map is displayed in a tile, it is not replaced if tiles are full. NOTE: The Locate me map control finds individual cameras in the camera sequence, not the camera sequence itself.
Cluster bubble	A group of three or more map objects placed close together are represented by a blue cluster bubble.	Click to zoom in on the map to view the individual map objects.
Custom object	Custom objects can be added to the map as icons or polygons to add custom behavior to the map.	Examples of custom objects include custom intercom solution and GPS tracker for mobile units. Contact us for information on Genetec™ Custom Solutions.
Door	- Door open - Door closed and no lock is configured - Door closed and locked - Door closed and unlocked - Door forced open - Door unlocked and in maintenance mode Events are displayed in event notification bubbles. The color of the bubble matches the color assigned to the event.	Monitor alarms, door states, and events. Point to the bubble to show more details. Click the notification bubble to replace it with a tile bubble. Unlock the door, override the unlock schedule, and shunt the reader by using the Door widget or by right-clicking the door on the map.
ESRI object	Clickable objects that come with ESRI maps. Have a similar function to KML objects.	Overlays useful information on maps, such as city boundaries, roads, and hydrographic features. Can represent moving objects, such as patrol vehicles, by refreshing their positions on the map at regular intervals.
Input pin	- Input in Normal state - Input in Active state - Input in Trouble (short circuit) or Trouble (open circuit) state - Input in Unavailable state The state colors are configurable, and the icon can be shown or hidden depending on the state. Intrusion inputs with defined types: - Burglary-type intrusion input - Door-type intrusion input - Fence-type intrusion input - Fire-type intrusion input - Gas-type intrusion input - Motion-type intrusion input - Panic-type intrusion input - Window-type intrusion input	Monitor the input state. Monitor intrusion detection areas. Inputs used for intrusion detection have additional visual indicators: The Bypass state is indicated with an 'X' superimposed on the input icon. With the Modify intrusion detection unit properties privilege, you can bypass an input or clear a bypass by right-clicking the input icon and selecting from the context menu. The Active alarm state is indicated by a red, pulsing halo surrounding the input icon. Left-clicking an intrusion input pin will display a pop-up with the entity name, color-coded status, alarm status, bypass state, and parent areas. The state of an input with a defined type is indicated with a dot superimposed on the lower left corner of the input icon. NOTE: You can change the icons of the input types on the Input definitions page of the Intrusion Manger role.
Intrusion detection area	- Intrusion detection area The different states are: Disarmed (not ready), Disarmed (ready to arm), Arming, Perimeter armed, Master armed, and Alarm active. The state colors are configurable, and the icon can be shown or hidden depending on the state.	Monitor alarms and intrusion detection area state. Arm or disarm the intrusion detection area from the widget, or by right-click the map object. Trigger, silence, or acknowledge an intrusion alarm from the intrusion detection area widget, or by right-clicking the map object. Change the Bypass state of one or multiple inputs by right-clicking the map object, and right-clicking the inputs.
KML object	Can be anything displayed as a clickable transparent layer over a georeferenced map.	Overlays static features on maps, such as city boundaries, roads, and hydrographic features. Can represent dynamic information, such as weather conditions and traffic flow, by refreshing the map layer at regular intervals.
Layout	- Layout A map object that is linked to a previously saved monitoring task layout.	Click to display the monitored cameras as a sequence in a tile bubble. Double-click to display all the cameras in separate tiles in the Monitoring task. If the map is displayed in a tile, it is not replaced if tiles are full.
LPR camera	- Fixed LPR camera - LPR camera is in maintenance mode Reads and hits are shown in notification bubbles.	Monitor the reads and hits from LPR cameras. Click to view live video from the associated context camera.
Macro	- Macro	Execute macros directly from maps. Override the default execution context on maps. Click on a macro to run it.
Map link	Map thumbnails, text, icons, images, or colored geometrical shapes.	Click to switch to the linked map. Enables map navigation without using the Maps toolbar. Useful when the map is displayed in the Monitoring task. NOTE: If Display alarms from linked maps is enabled in the map options, the number of active alarms on a linked map is shown on the link to that map.
Mobile user	- Mobile user with no picture	When showing mobile users on maps is enabled, shows mobile users and lets you message them and share entities. Point to the bubble to show the Security Center username. Bubble displays the user's picture, if available.
Output relay	- Output relay in Normal state - Output relay in Active state	Trigger output relays directly from maps. Click to show a list of behaviors you can trigger. For intrusion outputs: With the Trigger output privilege, right-click the output icon to change the output state from a context menu. The state can be changed from: Normal to Active Active to Normal Unknown to either Normal or Active Click to display a pop-up with the entity name, state, and assigned output behaviors.
Text, images and geometrical shapes	Text, icons, images, and colored shapes (polygons and ellipses)	These can be added to maps to provide additional information, indicate the location of points of interest, or serve as map links or alarms. For example, one application might be to indicate the location of wall-mounted scanners on a department store floor plan.
Zone	- Zone - Virtual zone - I/O zone The different states are: Disarmed, Normal, Active, and Trouble. The state colors are configurable, and the icon can be shown or hidden depending on the state.	Monitor alarms and zone state. Arm and disarm the zone from the widget.