Enabling shared parking permits

In an AutoVu™ Free-Flow parking system, to use the same parking permit for more than one vehicle, you must enable shared permits in Security Center.

What you should know

To enable shared permits:

  1. Start the Security Center Server Admin () application.
  2. Enter the server password that you set during the server installation, and click Log on.
    The Server Admin Overview page is displayed.
  3. Select your server from the Servers list.
  4. From the Actions drop-down list, select </> Console.
  5. Select the Commands tab.
  6. From the commands list, expand Parking management commands.
  7. Click one of the following to run its associated command:
    • Disable shared permit feature: Disabling this feature turns off the handling of shared permit hits. Vehicles with the same permit ID are not be placed in violation.
    • Enable shared permit feature: Enabling this feature activates the handling of shared permit hits in the parking zones posessing the same Pay-by-Plate Sync permit entity. Vehicles with the same permit ID are placed in violation.
      TIP: Running the Print module settings command displays the current status of several configurations, including the shared permit feature.